| Test speed | 2500r/min |
| Measuring time | 30s |
| Controller | touch screen+PLC control+imported servo motor, which will stop automatically after the test. |
| Volume (W×D×H) | Approx. 60×45×60 cm |
| Weight | 80 Kg |
| Power supply | AC220V 50HZ |
Ball Pen Ball Top Output Tester This machine is applicable to the ball top output test of ink ball point pen heads, neutral ball point pen heads and water-based ball point pen heads.
Pencil Core Strength Tester/Strength Testing Machine is used to test the force on the tip of lead core: sharpen the pencil to 20° and install it on the 45 degree gripper, the force value on the tip when there is breakage.
Automatic Vacuum Packaging Sealing Leakage Tester To determine the performance of paper or paperboard to absorb standard ink in a certain time and area. This instrument is mainly used to measure the ink absorption performance of paper or paperboard in a specified time and area.
Although the portable hardness tester is convenient to use, it often has different results due to the different force applied by each person. The machine is equipped with weights, the load is average and the force is stable.
Pen Clip Clamping Force Tester machine is the pen clip trigger spring 2 ~ 3 times, the pen set fixed in the pen clip clamping force instrument on the fixture, and the insert inserted between the pen set and pen clip, inserted into the depth of (10 ± 1) mm, open the instrument so that the insert out of the pen clip.
Decompression Instrument This machine is suitable for decompression of samples to observe whether there is ink leakage from the refill.
Correction Tape Adhesion Coating Tester place the test paper with the coating film in the testing machine, apply 130g pressure to the ball point pen core or neutral ink pen core conforming to the standard, draw a circle with a diameter of 50mm, and check whether the coating film is complete, warping and peeling after the test.
The Scraper Fineness Meter is widely used to measure the grinding fineness of sky paint, varnish, printing ink, etc., and the fineness is usually in microns (μm).
This machine is used to test the light resistance of the trace of water-based pen. Put the sample on the irradiation frame and irradiate it with ultraviolet lamp for a certain time to check the resistance of the trace to light.
GET A QUOTE