Pen Clip Clamping Force Tester

Application
This machine is the pen clip trigger spring 2 ~ 3 times, the pen set fixed in the pen clip clamping force instrument on the fixture, and the insert inserted between the pen set and pen clip, inserted into the depth of (10 ± 1) mm, open the instrument so that the insert out of the pen clip. Check whether the value of the insert out of the pen clip is in line with the requirements of the standard QB/T 1655-2006 Table 3.

Standards
QB/T 1655-2006 clause 7.14, QB/T 2775-2006 clause 5.6

Technical parameters

Surface roughness of accessories	Ra0.32μm ~ Ra0.63μm, thickness (0.80±0.02) mm, surface hardness HRC＞58 metal insert A
Surface roughness of accessories	Ra0.32μm ~ Ra0.63μm, thickness (3 ± 0.02) mm, surface hardness HRC＞58 metal insert B
Sensor	5kg
Stroke	0～300 mm
Volume (W×D×H)	82×18×41 cm
Weight	60kg
Power supply	AC220V 50HZ