Ball Pen Ball Top Output Tester

Application：
This machine is applicable to the ball top output test of ink ball point pen heads, neutral ball point pen heads and water-based ball point pen heads. During the test, fix the rear end of the pen head outward with a clamp, install a special thimble on the force sensor of this machine, stretch it from the middle hole at the rear end of the pen head to contact the ball, slowly increase the axial force to the standard value, and the ball shall not come out of the pen head.

Standard：
QB/T 4432-2012 Item 6.4

Technical parameter：

Sensor	5Kg
Load accuracy	≤ 1%
Speed	20-400mm/min adjustable
Motor	high-precision low-voltage servo motor
The controller is controlled by the touch screen, which can display the test curve, preset the jacking force as required, and automatically stop or maintain for a certain time when reaching the preset value
The upper and lower clamps are automatically aligned, and the thimble has five specifications as standard or customized according to requirements
Maximum stroke	200mm (including clamp)
Unit switching	kgf/gf/N/LB
Printer	micro thermal printer
Volume (WxDxH)	60 ×35× 50cm
Weight	60Kg
Power supply	AC220V 50HZ