Correction Tape Adhesion Coating Tester

Application:
This machine loads the correction tape into the coating tester to make the outlet nozzle contact the paper surface of the ordinary copy paper evenly, and keep the direction of the outlet nozzle at an angle of 45 ° with the paper surface. Apply 600g pressure, and apply pressure in one direction at 35mm/s tape scribing speed, so that the coating film covers a length of 100mm, five lines each. Then place the test paper with the coating film in the testing machine, apply 130g pressure to the ball point pen core or neutral ink pen core conforming to the standard, draw a circle with a diameter of 50mm, and check whether the coating film is complete, warping and peeling after the test.

Standard:
QB/T 4154-2010 Clause 5.5.2

Technical parameters:

Rounding speed	1 circle/s
Paper translation speed	2mm/s
Control mode	electric control
Written load	130g
Rounding diameter	50mm
Rounding direction	bidirectional rounding
Power supply	AC220V 50HZ