Light Fastness Tester For Water-Based Pen

Light Fastness Tester,Water-Based Pen tester,pen tester
Light Fastness Tester For Water-Based Pen SL-PL42
Application:
This machine is used to test the light resistance of the trace of water-based pen. Put the sample on the irradiation frame and irradiate it with ultraviolet lamp for a certain time to check the resistance of the trace to light.

Standard:
QB/T 1655-2006 Item 7.11

Technical parameters:
Ultraviolet lamp power 30W
Wavelength 2.537 × 102nm
Length of lamp tube 900mm
Auto control ink absorption time 120 ± 5s
Volume (WxDxH) About 100×30×40 cm
Weight 25 Kg
Power supply AC220V 50HZ

Recommend Products

Pencil Lead Core Slip Tester SL-PL17

Pencil Lead Core Slip Tester This machine is to add 400g weight to the pen clip, set the counting meter to zero, turn on the motor, lead core rotating friction on the copper plate to 100 turns, turn on the recorder, start drawing lines to record, wait for the recorder to rotate for a week and then turn the motor off.

Stapler Fatigue Life Tester SL-PL35

Stapler Fatigue Life Tester This machine is used to test the service life of the stapler.

Writing Lubrication Flexibility Tester SL-PL38

This tester is mainly used to test the friction between various writing pens and paper as an indicator of writing lubrication. It can be used to test hard pens such as neutral refills, soft pens such as marker pens, and angle adjustment to simulate the writing state.

Pen Point Ball Bead Fixation Tester SL-PL31

Pen Point Ball Bead Fixation Tester This machine is used to test the performance of the ball without breaking away from the ball seat under the action of a certain force.

Durability / Fatigue Tester For Pen Clip SL-PL07

Pen clip fatigue tester is used to test the durability and fatigue resistance of the pen clip, after testing a certain number of times, observe whether the pen clip still has elasticity, whether it can still be used normally, is a good instrument to assist pen making enterprises.

Ball Pen Ball Top Output Tester SL-PL40

Ball Pen Ball Top Output Tester This machine is applicable to the ball top output test of ink ball point pen heads, neutral ball point pen heads and water-based ball point pen heads.

Tensile Tester - Pen Cover Tension Testing Machine Manufacturers- SL-PL05

pen cover tensile tester is used to test the force used when the pen sleeve is detached from the pen body, the pen sleeve and pen bar are fixed on the fixture of the pen sleeve tension testing machine

Pencil Core Strength Tester/Strength Testing Machine SL-PL21

Pencil Core Strength Tester/Strength Testing Machine is used to test the force on the tip of lead core: sharpen the pencil to 20° and install it on the 45 degree gripper, the force value on the tip when there is breakage.

Cap Of Pen Air Flow/Cycle Tester SL-PL06

Cap Of Pen Air Flow/Cycle Tester is used to stationery manufacturers pen cap ventilation qualified rate inspection, quality supervision departments of stationery manufacturers to produce pen cap inspection, third-party inspection agencies, etc.

GET A QUOTE

Get in Touch

Captcha
×