Technical parameters
| Sample | Ball Pen,Gel pen,Whiteboards Markers,marker pen,fluorescent pen,Paint pencil |
| Load weight weight | 50g+/-0.5g |
| Maximum sample diameter | ≤φ24mm |
| Number of samples | 8 pcs/time |
| Sample single stroke / full stroke | 1.375 inches/2.75 inches |
| Writing speed | 1.0m/min-10.0m/min adjustable |
| Refill Rotation speed | 0.1-3.0 revolutions/min adjustable |
| Line spacing between 1mm and 5mm | 1.0mm-10.0mm adjustable |
| Writing angle | 60°~90° adjustable |
| Volume (WxDxH) | Host: 90x45x60cm |
| Weight | ≈100Kg |
| Power Supply | 220V, 20A |
Although the portable hardness tester is convenient to use, it often has different results due to the different force applied by each person. The machine is equipped with weights, the load is average and the force is stable.
Pencil Lead Hardness Tester / Hardness Testing Machine This machine is used to test the hardness of pencil lead.
Portable Computer Colorimeter is suitable for color quality control and color difference detection in textile, printing and dyeing, clothing, footwear, leather, chemical, plastic, plastic, pigment, paint, ink, printing, hardware, photography, toys, food, medicine and other industries.
Ink Surface Tensiometer can adapt to a variety of liquid surface tension and interfacial tension testing, is a very strong performance, cost-effective table, interfacial tension testing instrument.
SL-PL22 Writing Tester / Write Test Machine is the glue board printing coated original paper mounted on the smooth metal circle plate of the cross scribing machine, then insert the pencil into the pen clip tighten, adjust the clamping position, so that the arm lever to maintain balance, so that the lead core contact in the coated original paper and into the scratch drawing line.
Correction Tape Adhesion Coating Tester place the test paper with the coating film in the testing machine, apply 130g pressure to the ball point pen core or neutral ink pen core conforming to the standard, draw a circle with a diameter of 50mm, and check whether the coating film is complete, warping and peeling after the test.
Tap Pen Intermittent Meter This machine is an instrument to test the intermittent writing ability of the tap pen, after a set ambient temperature, humidity, dry and windy environment, test the writing performance of the tap pen after a period of time.
Pencil Core Tip Force Tester / Force Testing Machine Pencil core tip force test: sharpened pencils are mounted on a 45 degree gripper and the force applied to the pencil tip when it breaks.Flexural strength test of the pencil core.
Cap Of Pen Air Flow/Cycle Tester is used to stationery manufacturers pen cap ventilation qualified rate inspection, quality supervision departments of stationery manufacturers to produce pen cap inspection, third-party inspection agencies, etc.
GET A QUOTE