Cap Of Pen Air Flow/Cycle Tester

cycle tester,air flow tester,cycle testing machine,stationery tester
Cap Of Pen Air Flow/Cycle Tester SL-PL06
Application
Pen cap air flow tester is used to stationery manufacturers pen cap ventilation qualified rate inspection, quality supervision departments of stationery manufacturers to produce pen cap inspection, third-party inspection agencies, etc.

Standards
① BS7272-1/-2: 2008 Safety standard for choking prevention of pen caps and pens plugs
② JTS S 6060:1996 Safety requirements for writing pens and marker pens caps for children up to and including 14 years of age
③ ISO 11540:1993 Safety requirements for writing pens and marker caps for children up to and including 14 years of age
④ GB 21027:2007 General requirements for the safety of student products
⑤ GB/T 24110-2009 Safety requirements and test methods for pen caps and end caps for import and export pen products

Principle
This machine is based on the "GB21027-2020 general requirements for the safety of student products" standard (that is, under a pressure of 1.33KPa, the air ventilation capacity of the pen cap must reach 8L/min) production, is a special testing instrument customized for pen cap ventilation testing. Mainly the pen cap is completely inserted into a suitable diameter, air flow, pressure difference between the two ends of the elastic tube, in order to measure the air flow of the pen cap.

Technical parameters
Flow control valve ±0.1L/min/resolution 0.001L/min
Flow meter can measure air flow at 5L/min and 10L/min, at least accurate to ±0.2 L/min
Manometer able to measure at least 4Kpa of pressure.
Manometer accuracy ±0.1kpa
Elastic tube can be equipped with 7~14mm hose, can measure 6~16mm specification pen cap
Control mode LCC touch screen control
Pen cap test components self-locking quick interface, connect the pen cap convenient and fast.
Gas source device requirements in the pressure range of 4kPa ~ 50kPa, stable flow is at least 25L/min

Accessories
1. Instrument operating instructions, a warranty card
2. A set of silicone hose

Recommend Products

Write Test Machine For Zig Zag SL-LP002

Write Test Machine For Zig Zag This machine is used to detect the refill of a pen, and draw a Z shape at a certain speed to check whether the stitching meets the performance required by Article 3.6 of ISO27668-1.

Pen Cover Durability Tester - Fatigue Testing Machine SL-PL04

Pen Cover Durability Tester is suitable for the fatigue test of pen sleeve, fix the pen sleeve and pen barrel on the fatigue tester respectively, adjust the fixture, start the instrument, and perform the fatigue test on the pen sleeve at the standard speed (100cpm).

Pencil Lead Core Slip Tester SL-PL17

Pencil Lead Core Slip Tester This machine is to add 400g weight to the pen clip, set the counting meter to zero, turn on the motor, lead core rotating friction on the copper plate to 100 turns, turn on the recorder, start drawing lines to record, wait for the recorder to rotate for a week and then turn the motor off.

Electric Heating Constant Temperature Drying Oven SL-PL46

Electric Heating Constant Temperature Drying Oven This machine can be used for the temperature resistance test of water-based ballpoint pens and refills, and is also suitable for the determination of the content of total volatile organic compounds in adhesives for students.

Computerized Lead Core Slip Tester SL-PL18

Computerized Pencil Lead Core Slip Tester This machine is to add 400g weight to the pen clip, set the counting meter to zero, turn on the motor, lead core rotating friction on the copper plate to 100 turns, turn on the recorder, start drawing lines to record, wait for the recorder to rotate for a week and then turn the motor off.

Cap Of Pen Air Flow/Cycle Tester SL-PL06

Cap Of Pen Air Flow/Cycle Tester is used to stationery manufacturers pen cap ventilation qualified rate inspection, quality supervision departments of stationery manufacturers to produce pen cap inspection, third-party inspection agencies, etc.

Correction Tape Adhesion Coating Tester SL-PL34

Correction Tape Adhesion Coating Tester place the test paper with the coating film in the testing machine, apply 130g pressure to the ball point pen core or neutral ink pen core conforming to the standard, draw a circle with a diameter of 50mm, and check whether the coating film is complete, warping and peeling after the test.

bending resistance tester

This bending resistance tester is suitable for testing the bending value of pens.

Stationery Box Folding Endurance Testing Machine SL-PL24

Stationery Box Folding Endurance Testing Machine is used to test the ability of plastic stationery boxes to withstand turning and folding at the folding line of the box surface.

GET A QUOTE

Get in Touch

Captcha
×