Pencil Core Tip Force Tester

force tester,force testing machine
Pencil Core Tip Force Tester / Force Testing Machine SL-PL20
Application:
Pencil core tip force test: sharpened pencils are mounted on a 45 degree gripper and the force applied to the pencil tip when it breaks.
Flexural strength test of the pencil core: the pencil core is placed on a "V" shaped holder with a cutter placed on top of the holder to test the force when the pencil core is broken.

Standards:
QB/T 2774-2006 5.1,GB/T 26704-2011 5.1,QB/T 1024-2007 5.1

Technical parameters:
Sensor 50kg
Load accuracy ≤1%
Speed 20-400 mm/min adjustable
Motor high precision stepper motor
Controller LCD screen display
Maximum stroke 800 mm (including fixture)
Unit switch Kgf/N/LB
Printer Micro thermal printer (optional)
Volume (W×D×H) 45×36×130 cm
Weight 60 Kg
Power supply AC220V 50HZ

Recommend Products

Rubber Durometer / Rubber Hardness Tester SL-PL48

Although the portable hardness tester is convenient to use, it often has different results due to the different force applied by each person. The machine is equipped with weights, the load is average and the force is stable.

Automatic Vacuum Packaging Sealing Leakage Tester SL-PL37

Automatic Vacuum Packaging Sealing Leakage Tester To determine the performance of paper or paperboard to absorb standard ink in a certain time and area. This instrument is mainly used to measure the ink absorption performance of paper or paperboard in a specified time and area.

Pencil Lead Core Slip Tester SL-PL17

Pencil Lead Core Slip Tester This machine is to add 400g weight to the pen clip, set the counting meter to zero, turn on the motor, lead core rotating friction on the copper plate to 100 turns, turn on the recorder, start drawing lines to record, wait for the recorder to rotate for a week and then turn the motor off.

friction color fastness test instruments

This friction color fastness test instruments is suitable for measuring the color fastness to dry and wet rubbing of colored fabrics such as cotton, chemical fiber and blended fabrics.

Pens Bending Tester / Testing Machine SL-PL23

This machine is suitable for testing the bending value of pens.

Ink Surface Tensiometer & Interfacial Tensiometer SL-PL27

Ink Surface Tensiometer can adapt to a variety of liquid surface tension and interfacial tension testing, is a very strong performance, cost-effective table, interfacial tension testing instrument.

Correction Tape Adhesion Coating Tester SL-PL34

Correction Tape Adhesion Coating Tester place the test paper with the coating film in the testing machine, apply 130g pressure to the ball point pen core or neutral ink pen core conforming to the standard, draw a circle with a diameter of 50mm, and check whether the coating film is complete, warping and peeling after the test.

Flexible Pencil Fatigue Abraision Tester SL-PL32

Flexible Pencil Fatigue Abraision Tester This machine is used to test the performance of movable pencils that can still meet the requirements of lead clamping force and lead conveying core performance after the press fatigue test.

Crayon Softening Point Tester SL-PL29

Crayon Softening Point Tester is to determine the temperature of crayons when they soften in order to identify stickiness and heat resistance.

GET A QUOTE

Get in Touch

Captcha
×